News

How to reasonably select and use sealing gasket media , temperature, pressure and working conditions should be important factors. For example, when the working pressure is not high, plastic flange docking (PN) is used. For another example, in a working environment with chemical media, different sealing media must be reasonably matched to achieve good results, otherwise unpredictable chemical changes are prone to occur. Therefore, any paradox in the selection of seals will lead to unimaginable consequences. Generally, the gasket structures have the following types for reference: 1. For flange connection a, flat gasket: multi-purpose medium pressure asbestos, oil-resistant asbestos, polytetrafluoroethylene, graphite gasket or reinforced graphite gasket, non-asbestos gasket, metal flat gasket, special metal gasket wait b. Spiral gasket: with outer ring or with inner and outer rings (most commonly used for flat flanges); ring type with inner ring (commonly used for concave and convex flanges); basic type (without inner and outer rings), special for grooved flanges, sealing surface Narrow, flat-welded full-face flange sealing surface is wider, equivalent to a spiral wound gasket with an inner ring and an outer ring. It is necessary to pay attention to which country and standard the flange is. 2. Rotating and pulling shaft seals use a variety of fillers. Such as flexible graphite rings (open and non-open), braided packing (or packing rings) of various materials, internal and external skeleton oil seal YX rings, O-rings, etc. of various materials. 3. Special parts sealing products. Common sealing strips, PTFE ball valve seats, graphite packing rings and rubber butterfly valve rings, etc. What should you pay attention to when installing seals? 1. Do not damage the sealing surface or sealing line of the seal. The sealing performance of the flat seal depends on the upper and lower end faces; the sealing performance of the hydraulic seal depends on the lip line related to the hole or shaft. The portions are tender and rich. Graphite, rubber, fiber, etc. that are elastic, temperature-resistant, corrosion-resistant, and aging-resistant are all special materials that are easily damaged. Therefore, special protection and care are required during handling, installation and storage. Once damaged, they tend to be damaged. Leaves many hidden dangers to the sealing parts; 2. Do not force installation Some seals are placed in grooved stuffing boxes and need to be installed tightly. Do not be rough or brutal during the construction process. Forced loading with large movements will inevitably destroy the original prefabricated structure of the seal. Filling out the required sections is a sure recipe for disaster. The installation of such seals must be very careful and careful, and the embedding must be done step by step; 3. Pay attention to balance and symmetry during installation and place the seal close to the effective sealing surface (or lip line). After the system is turned on and used, the seals must be further observed and tightened to prevent malfunctions caused by micro-leakage due to changes in operating conditions (such as boosting) during system operation. How to properly store seals that are not in use temporarily? 1. Anti-aging, light-proof, moisture-proof, placed flat, away from cold and heat sources 2. No pressure is applied to keep the seal in a naturally relaxed state, and no external force is applied to change its physical shape 3. Classification and marking of the same appearance, different materials, parts used, applicable standards, purchase date, etc. For more information, please pay attention to Runfengda Equipment www.rfdphe.com

Gasket selection When any type of gasket is used, in order to ensure long-term effective sealing, the following eight important characteristics must be paid attention to when selecting and using the gasket: 1. Gas seal of gasket For the medium of the sealing system, the gasket can be used for a certain time within the appropriate temperature and pressure range without leakage. 2. Compressibility of gasket After the connection bolts are tightened, the contact surface of the gasket and flange should be well matched to ensure the sealing 3. Creep resistance of gasket Under the influence of pressure load and service temperature, the gasket should have better creep resistance, otherwise it will cause bolt torque loss, reduce the surface stress of the gasket, and cause certain leakage. 4. The chemical properties of the gasket The selected gasket needs to be able to withstand the corrosion of the medium, and at the same time, it must not cause pollution to the sealed medium. The current sealing products need to meet the environmental protection standards. For example, the BD series of sealpilot uses absolutely environmentally friendly non-asbestos sealing material Impact on sealing and environment 5. The resilience of the gasket Even when the system is stable, there will be a slight displacement due to the temperature and pressure of the two connected flanges. The elastic function of the gasket needs to compensate for this displacement to ensure the tightness of the system. 6. Anti-stickiness of gasket The gasket should be easily removed from the flange when it is replaced after use, without sticking 7. Corrosion of gasket Gaskets should be non-corrosive to the sealing system and the flange itself 8. Temperature and pressure of gasket The selected gasket should ensure that it can be used normally under the condition of the lowest temperature pressure and the highest temperature pressure of the sealing system. For more details, please pay attention to Runfengda Equipment www.rfdphe.com

Plate heat exchanger gasket is a device used to increase the heat transfer efficiency of the heat exchanger. It can increase the heat transfer area and heat conduction efficiency of the heat exchanger. Here's how it works: 1. Increase the heat transfer area: Plate heat exchanger gaskets are usually made of metal materials and have a certain thickness. After installing the gasket, multiple narrow channels can be formed inside the heat exchanger, thereby increasing the heat transfer area. These channels allow the fluid to form a complex flow path inside the heat exchanger, increasing the contact area between the fluid and the heat exchange plate and improving heat transfer efficiency. 2. Improve heat conduction efficiency: Plate heat exchanger gaskets usually have good heat conduction properties. When heat flows through the gasket, the gasket can effectively conduct heat to the adjacent heat exchange plate, thereby improving heat transfer efficiency. Factors such as the thickness of the gasket and the thermal conductivity of the material can affect heat transfer efficiency. 3. Optimize fluid flow: Plate heat exchanger gaskets can also change the flow pattern of the fluid, thereby optimizing the flow state of the fluid. For example, gaskets can guide the fluid to form turbulent flow inside the heat exchanger, increase the mixing degree of the fluid, and improve heat transfer efficiency. In addition, the gasket can also change the flow rate and direction of the fluid so that the fluid is evenly distributed inside the heat exchanger and avoids the problem of local blockage or uneven flow of the fluid. In short, plate heat exchanger gaskets can improve the heat transfer efficiency of the heat exchanger by increasing the heat transfer area, improving heat transfer efficiency and optimizing fluid flow. For more information, please pay attention to Runfengda Equipmentwww.rfdphe.com

Plate heat exchanger gasket is a sealing element for plate heat exchangers, used to ensure the sealability and heat transfer efficiency of the heat exchanger. Plate heat exchanger gaskets are usually made of metal or non-metal materials, such as stainless steel, copper, aluminum, PTFE, etc. They have good high temperature resistance, corrosion resistance and pressure resistance, and can withstand high pressure and high temperature working environment. The main function of the gasket is to fill the sealing gap of the plate heat exchanger and prevent the medium from leaking and mixing. They also provide good heat transfer to ensure efficient operation of the heat exchanger. The selection of plate heat exchanger gaskets should be determined according to specific working conditions and medium properties. Different media may require gaskets of different materials to achieve the best sealing effect and heat transfer efficiency. In a word, the plate heat exchanger gasket is a very important sealing element in the plate heat exchanger, which can ensure the normal operation and efficient work of the heat exchanger. For more details, please pay attention to Runfengda Equipment www.rfdphe.com

Plate heat exchanger (PHE) gasket is one of the key components used in plate heat exchangers. It is located between the plates and plays the role of isolating the fluid on both sides, and also plays the role of sealing to prevent fluid leakage. PHE gaskets are usually made of resilient materials such as rubber or plastic. These materials have good sealing performance and corrosion resistance, and can withstand high temperature and high pressure working environment. The design and selection of PHE gaskets are very important as they directly affect the efficiency and performance of the heat exchanger. Appropriate gaskets can ensure the sealing performance and heat exchange effect of the heat exchanger, and also prolong the service life of the heat exchanger. The selection of PHE gaskets should consider factors such as the nature of the fluid, temperature, pressure and flow. Different application scenarios may require different types of gaskets, such as NBR (Nitrile Butadiene Rubber), EPDM (Ethylene Propylene Rubber), Silicone, etc. Additionally, PHE gaskets require regular inspection and replacement to ensure proper functioning. Outdated or worn gaskets can cause leaks and reduced performance. In a word, PHE gaskets play an important role in the plate heat exchanger, they not only isolate the fluid on both sides, but also ensure the sealing performance and heat exchange effect of the heat exchanger. Proper gasket selection and regular maintenance are key to keeping your heat exchanger functioning properly. For more information, please pay attention to Runfengda Equipment www.rfdphe.com